ECG INGOT (موصل) و T-INGOT
يتم إنتاج سبيكة موصلة / سبيكة T بجودة Etial-6E و Etial-7E و Etial-8E. التركيبات الكيميائية والمعايير المماثلة لهذه المنتجات متوفرة في الجداول أدناه.
لا يوجد سبيكة سبيكة و T-INGOT
يتم إجراء إنتاج الجودة Etial-F و Etial-F1 و Etial-0 و Etial-1 و Etial-3 و Etial-5 و Etial-6 و Etial-7 و Etial-8 و Etial-9. التركيبات الكيميائية والمعايير المماثلة لهذه المنتجات متوفرة في الجداول أدناه.
ALLOY INNOG
يتم الإنتاج باستخدام أفران الحث عالية الجودة Etial-110 ، 120 ، 140 ، 141 ، 145 ، 147 ، 150 ، 160 ، 171 ، 175 ، 177 ، 178 ، 180 ، 195 ، 220 ، 221 و 509.
التركيبات الكيميائية والمعايير المماثلة لهذه المنتجات متوفرة في الجداول أدناه.
معلومات
| | ETİ NORM | Al1 | Fe2 | Si2 | Cu2 | Zn2 | Ti2 | Mn2 | DİĞERLERİ / OTHER COMP. |
|
| HERBİRİ EACH | TOPLAM TOTAL | |||||||||
| ECG (İLETKEN ) CONDUCTIVE | ETİAL-7E3 | 99,70 | 0,25 | 0,10 | – | – | – | – | 0,02 | 0,10 |
| ETİAL-6E9 | 99,60 | 0,30 | 0,10 | – | – | – | – | 0,02 | 0,10 | |
| ALAŞIMSIZ UNALLOYED | ETİAL-8/17 | 99,90 | 0,07 | 0,03 | 0,03 | 0,03 | 0,02 | 0,02 | 0,02 | 0,10 |
| ETİAL-84 | 99,80 | 0,15 | 0,10 | 0,03 | 0,03 | 0,02 | 0,02 | 0,02 | 0,10 | |
| ETİAL-7 | 99,70 | 0,25 | 0,15 | 0,03 | 0,04 | 0,03 | – | 0,03 | 0,10 | |
| ETİAL-6 | 99,60 | 0,30 | 0,20 | 0,04 | 0,05 | 0,04 | – | 0,03 | 0,10 | |
| ETİAL-5 | 99,50 | 0,40 | 0,25 | 0,05 | 0,05 | 0,04 | – | 0,03 | 0,10 | |
| ETİAL-3 | 99,30 | 0,60 | 0,35 | 0,05 | 0,06 | 0,05 | – | 0,05 | 0,15 | |
| ETİAL-18 | 99,00 | 0,80 | 0,35 | 0,05 | 0,10 | 0,05 | 0,05 | 0,05 | 0,15 | |
| ETİAL-0 | 99,00 | 0,70 | 0,25 | 0,15 | 0,06 | 0,05 | – | 0,05 | 0,15 | |
| ETİAL-F5,6,10 | 95,00 | 5,00 | 1,00 | 1,50 | 1,50 | 0,05 | 1,00 | 0,10 | 1,00 | |
| (1) Min. Değerlerdir. ( Min. Value ) (6) Mn=1,00 max. (2) Limitler verilmemiş ise max. değerlerdir. (7) Fe+Si=0,10 max. (2) If limits are not gıven, it is max. (3) Ti+V+Mn+Cr=0,02 max.Fe/Si=2,00 min Fe+Si ≤ 0,30 (8) Fe+Si=0,95 max. (4) Fe+Si= 0,20 max. (9) Ti+V+Mn+Cr= 0,02 max. Fe/Si=2,00 min Fe+Si=0,31-0,35 (5) Fe+Si=5,00 max. (10) Mg=1,00 max. |
||||||||||
| STANDARDS | ETİNORM | TSE | GERMANY DIN |
USA AA |
FRANCE NF |
ENG. BS |
ITALY UNI |
ISO | CSA | A.S.T.M |
| ECG (İLETKEN) CONDUCTIVE | ETİAL- 7E | – | EAl99,07 | EC | A6/L | 1E | – | – | – | – |
| ETİAL- 6E | – | EAl99,6 | EC | A6/L | 1E | – | – | – | – | |
| ALAŞIMSIZ UNALLOYED | ETİAL-8/1 | – | – | – | – | – | – | – | – | – |
| ETİAL- 8 | Al99,8 | Al99,8 | 1080 | A 8 | 1 A | P-ALP99,8 | AL99,8A | – | – | |
| ETİAL- 7 | Al99,7 | Al99,7 | 1070 | A 7 | L 48 | P-ALP99,7 | AL99,7 | – | – | |
| ETİAL- 6 | – | – | 1060 | A 6 | – | – | Al99,6 | 9970 | ER1060 | |
| ETİAL- 5 | Al99,5 | Al99,5 | 1050 | A 5 | 1 B | 4507 | AL99,5 | 9950 | – | |
| ETİAL- 3 | – | – | 1030 | A 4 | – | – | AL99,3 | – | – | |
| ETİAL- 1 | Al99 | Al99,0 | 1200 | – | – | – | AL99,0 | – | – | |
| ETİAL- 0 | Al99Cu | Al99,0 | 1100 | A 45 | 1 C | P-ALP99,0 | AL99,0Cu | 9900 | 1100 |
| ETİNORM | Fe | Si | Cu | Mn | Mg | Zn | Ni | Ti | Pb | Sn |
| ETİAL-110 | 0,70 | 4,00-6,00 | 2,00-4,00 | 0,20-0,60 | 0,15 | 0,20 | 0,30 | 0,20 | 0,10 | 0,05 |
| ETİAL-120 | 0,50 | 4,50-6,00 | 0,10 | 0,20 | 0,10 | 0,10 | 0,10 | 0,20 | 0,10 | 0,10 |
| ETİAL-140 | 0,60 | 11,50-13,50 | 0,10 | 0,40 | 0,10 | 0,10 | 0,10 | 0,15 | 0,10 | 0,05 |
| ETİAL-141 | 1,00 | 11,50-13,50 | 0,20 | 0,30 | 0,20 | 0,10 | 0,10 | 0,15 | 0,10 | 0,05 |
| ETİAL-145 | 0,60 | 11,00-13,00 | 0,80-1,50 | 0,20 | 0,80-1,40 | 0,20 | 0,80-1,30 | 0,10 | 0,10 | 0,05 |
| ETİAL-147 | 0,25 | 8,70-9,10 | 3,40-3,70 | 0,20 | 0,40-0,80 | 0,20 | 0,20 | 0,10 | 0,10 | 0,05 |
| ETİAL-150 | 1,00 | 11,00-13,00 | 1,75-2,50 | 0,50 | 0,40 | 0,70 | 0,30 | 0,15 | 0,10 | 0,10 |
| ETİAL-160 | 1,00 | 7,50-9,00 | 3,00-4,00 | 0,50 | 0,30 | 1,00 | 0,20 | 0,20 | 0,10 | 0,10 |
| ETİAL-171 | 0,50 | 9,00-10,00 | 0,10 | 0,40-0,60 | 0,30-0,45 | 0,10 | 0,10 | 0,15 | 0,05 | 0,05 |
| ETİAL-175 | 0,60 | 9,00-10,50 | 2,50-3,50 | 0,30 | 0,70-1,20 | 0,50 | 0,30 | 0,15 | 0,10 | 0,05 |
| ETİAL-177 | 0,20 | 6,60-7,40 | 0,02 | 0,03 | 0,30-0,45 | 0,04 | 0,02 | 0,08-0,14 | 0,05 | 0,05 |
| ETİAL-178 | 0,40 | 5,00-5,50 | 2,80-3,20 | 0,10-0,20 | 0,15-0,25 | 0,50 | 0,30 | 0,15 | 0,10 | 0,05 |
| ETİAL-180 | 1,00 | 9,00-11,50 | 0,70-2,50 | 0,50 | 0,30 | 2,00 | 0,50 | 0,20 | 0,10 | 0,20 |
| ETİAL-195 | 0,60 | 17,00-19,00 | 0,80-1,50 | 0,20 | 0,80-1,30 | 0,20 | 0,80-1,30 | 0,10 | 0,10 | 0,05 |
| ETİAL-220 | 0,30 | 0,35 | 4,00-5,00 | 0,10 | 0,10 | 0,10 | 0,10 | 0,05 | 0,05 | 0,05 |
| ETİAL-221 | 0,30 | 0,30 | 4,00-5,00 | 0,10 | 0,05 | 0,10 | 0,10 | 0,15-0,30 | 0,05 | 0,05 |
| ETİAL-509 | 0,60 | 1,00 | 0,05 | 0,2-0,5 | 7-10 | 0,10 | – | 0,15 | – | – |
| 1) Limitler verilmemiş ise azami değerdir. (If limits are not given, it is max.) 2) Mn+Fe=1,30 max | ||||||||||
| ETİNORM | TSE | GERMANY DIN |
USA AA |
FRANCE NF |
ENGLAND BS |
ISO | CSA | A.S.T.M |
| ETİAL-110 | AlSi5Cu3 | – | 319 | A-S5U3 | LM4 | AlSi5Cu3 | SC53 | BC640 |
| ETİAL-120 | AlSi 5 | AlSi5 | B443 | – | LM18 | AlSi 5 | S5 | S5A |
| ETİAL-140 | AlSi 12 | G-AlSi 12 | A413 | AS13 | LM6 | AlSi 12 | – | A13 |
| ETİAL-141 | AlSi 12Fe | GD-AlSi 12 | 413 | A-S 12 | LM 20 | AlSi 12Fe | S12P | S12C |
| ETİAL-145 | – | – | A332 | A-S 12UN | LM 13 | – | L2551 | SN122A |
| ETİAL-147 | – | – | – | – | – | – | – | – |
| ETİAL-150 | – | – | – | – | – | – | – | – |
| ETİAL-160 | AlSi 8Cu3Fe | G-AlSi 8Cu3 | A-380 | A-S 9U3A | LM 24 | AlSi8Cu3Fe | L2630 | 380 |
| ETİAL-171 | AlSi10Mg | G-AlSi10Mg | A-360 | A-S9GU | – | – | – | 360 |
| ETİAL-175 | – | – | Fe332 | – | LM 26 | – | SC103A | |
| ETİAL-177 | – | – | A357 | – | – | – | C135 | – |
| ETİAL-178 | – | – | – | – | – | – | – | – |
| ETİAL-180 | – | – | – | – | LM2 | – | – | A03831 |
| ETİAL-195 | – | – | 392,.1 | – | – | – | – | 392 |
| ETİAL-220 | AlCu4Si | GAlCu4,5 | – | A-U50-T | L91 | – | 225 | – |
| ETİAL-221 | AlCu4Ti | GAlCu4Ti | – | – | LM11 | AlCu4Ti | 226 | – |
| ETİAL-509 | – | GDAlMg9 | – | – | – | – | – | – |
| ETİNORM | ETİAL-110 | ETİAL-120 | ETİAL-140 | ETİAL-141 | ETİAL-145 | ETİAL-147 | ETİAL-150 | ETİAL-160 |
| ÖZGÜL AĞIRLIK (gr/cm3) | 2,76 | 2,68 | 2,66 | 2,66 | 2,69 | 2,76 | 2,67 | 2,76 |
| ERGİME ARALIĞI (0C) | 525-625 | 575-630 | 575-585 | 575-585 | 535-590 | 520-580 | 525-580 | 540-595 |
| ISISAL İLETKENLİK (cal/cm.s0C) | 0,32 | 0,35 | 0,37 | 0,29 | 0,21 | 0,25 | – | 0,23 |
| KOROZYON DAYANIMI | ORTA | ÇOK İYİ | ÇOK İYİ | ÇOK İYİ | İYİ | ORTA | ORTA | ORTA |
| DÖKÜLEBİLİRLİLİK | ÇOK İYİ | MÜKEMMEL | MÜKEMMEL | MÜKEMMEL | İYİ | İYİ | MÜKEMMEL | İYİ |
| İŞLENEBİLME | İYİ | ORTA | ORTA | ORTA | İYİ | İYİ | İYİ | İYİ |
| ANODİK OKSİDASYON | Sadece Yüzey Korumada | |||||||
| OTHER FEATURES AND USES | Good Casting, Weldability Characteristics, Cylinder heads, crankcases of combustion engines. | Kitchen Utensils, food handling equipment, Marine fittings miscellaneous thin section castings. | Thin Section and mixed castings, engine cases, measuring boxes, pump parts, marine atmosphere. | Mixed and thin-walled pressure castings. | Sand and Gravity mold Castings, pistons and other engine parts | Permanent castings, soleplate. | Used in high strength pressure castings. | Used in die casting parts that require Good Surface. |
| NOTE: NUMBER VALUES ARE APPROXIMATELYDEĞERLERDİR. | ||||||||
| ETİNORM | ETİAL-171 | ETİAL-175 | ETİAL-177 | ETİAL-180 | ETİAL-195 | ETİAL-220 | ETİAL-221 | ETİAL-509 |
| SPECIFIC WEIGHT (gr/cm3) | 2.64 | 2.76 | 2.68 | 2.74 | – | – | 2.77 | 2.6 | MELTING RANGE (0C) | 575-595 | 520-580 | – | 570-525 | – | – | 541-647 | 520-620 |
| THERMAL CONDUCTIVITY (cal/cm.s0C) |
0.27 | 0.25 | 0.38 | 0.24 | – | – | 0.35 | 0.24 | CORROSION RESISTANCE | VERY GOOD | MEDIUM | GOOD | GOOD | GOOD | BAD | BAD | PERFECT |
| PASTABILITY | PERFECT | GOOD | GOOD | GOOD | GOOD | BAD | BAD | GOOD | PROCESSABLE | MEDIUM | GOOD | MEDIUM | GOOD | GOOD | VERY GOOD | VERY GOOD | VERY GOOD |
| ANODIC OXIDATION | Sadece Yüzey Korumada | |||||||
| OTHER FEATURES AND USES | Strength, pourability, corrosion resistance, tightness under pressure | It is resistant to hot cracking and its fluidity is very good. It is used in pistons of internal combustion engines. | It is used for pressure sealing rims in the automotive industry. | Widely used It is a general purpose alloy. It is used in pressure castings. | It is used in the manufacture of pistons, cylinder blocks of internal combustion engines. | Used in sand and permanent castings, gearboxes | It is used in sand and permanent mold castings, general engineering applications, and aircraft. | Corrosion resistant cast kitchen and office machine bodies, optical instruments, decorative casting parts and die casting. |
| NOTE :Numbers are approximate. | ||||||||
